1975 Rockwell Aero Commander 690A

• Government owned well maintained workhorse primarily used in the transport of prisoners. 
• Contact Broker to be emailed PDF's for Maintenance Spec sheet, Airframe, Engine and Prop Logs
• Complete Logs
• No Damage History located in Logs or on NTSB website 
• Landing Gear Overhaul 5 Year Gear Insp Due 1/25
• ME 406 ELT
• OXYGEN SYSTEM
• XM SATELLITE WEATHER
• WINGLET WINGTIPS STC SA 1359GL
• CLEVELAND WHEELS AND BRAKES CONVERSION KIT

Engine 1 Notes

• Make & Model TPE 331-10T-515K Serial Number: P79093C
• Engine Total Time: 14962.4 : 
• Time Since Overhaul: 3790.8     
• Time Since Hot Section: 1256.5 :

Engine 2 Notes

• Make & Model TPE 331-10T-515K Serial Number: P79955C
• Engine Total Time: 11885.7    
• Time Since Overhaul: 3790.8    
• Time Since Hot Section: 1256.5

Modifications/Conversions:

Date of Modification: 3/21/2018

Modification: Removed 2ea Garmin GTX330 Installed 1ea Garmin GTX 345 and 1ea GTX330ES transponders.(no 337 located)

Date of Modification: 12/20/2012

Modification: STC SA02153LD-D Installed dual Garmin G600 Primary flight display and Multifunction displays, installed dual GDC 74 Air Data Computers, Installed Dual GDC 77 Altitude Heading and Reference Units

Date of Modification: 12/20/2012

Modification: STC SA01933LA-D Installed a Second GNS430W and upgraded previously installed GNS430W.

Installed Garmin GTX 330 2x

Installed Garmin audio panel GMA 340

Installed SL-30 Nav comm

Date of Modification: 12/20/2012

Modification: Complied with

CK159-1 RH Nose beam assembly Modification

CK159-3 Upper deck nose gear retraction support Structure Modification.

Date of Modification: 12/20/2012

Modification: CK-144-2 Lower wing spar cap Replacement

Date of Modification: 12/20/2012

Modification: Refurbished Interior

Date of Modification: 3/31/2009

Modification: STC SA01762SE Installed LCD Fuel quantity Indicator and replaced fuel quantity indicating system

Date of Modification: 11/7/2006

Modification:

Repaired upper surface of Left wing per SB 237

Date of Modification: 9/8/04

Modification:

Installed GNS 430 and other avionic equipment

Date of Modification: 8/17/2004

Modification: Installed STEC 65 Two axis Autopilot and STEC Yaw Damper system Model ST591

Date of Modification: 8/17/2004

Modification: Installed Honeywell KGP560 EGPWS PROCESSOR, Installed Honeywell KDR 610 Datalink (2009)

Date of Modification: 7/16/2003

Modification: Installed Factory new wing rib PN 170032-52 @RH WS 98.36 Reskinned Lower surface right wing.

Date of Modification: 9/6/2001

Modification: Engine conversion to TPE331-10T-515K

Date of Modification: 2/19/1999

Modification: Installed Aero Commander Winglets

Date of Modification: 5/30/1996

Modification: STC SA8124SW.1 Removed Main Landing Gear Aft Wheel Well Doors and related hydraulic actuating components.

Date of Modification: 4/27/1988

Modification: STC SA497GL Installed Cleveland Wheels and Brakes

Date of Modification: 11/22/1978

Modification: Installed Altitude Alerter 540-22722-034 in center throttle Quadrant

• EFIS /2 EA GARMIN GDU620 PFD MFD
• AUTO PILOT/STEC 65 2 AXIS Connected to GNS430's
• GPS/NAVIGATION/COMMUNICATION /2 EA GARMIN GNS 430W
• FLIGHT DIRECTOR/KI-256
• TRANSPONDERS/ ADS-B GARMIN GTX345 and GTX 330ES W ADS B out
• WEATHER/KDR 610 WEATHER DATA LINK WITH SIRIUS XM WEATHER
• MULTIFUNCTION DISPLAY (WEATHER)/KMD 850
• AIR DATA/ 2EA GARMIN GDC 74
• ALTITUDE HEADING AND REFERENCE SYSTEM/2ea GARMIN GRS 77
• EGPWS/HONEYWELL KGP560 EGPWS PROCESSOR
• AUDIO PANEL/GARMN GMA 340
• RADAR ALTIMETER/COLLINS ALT-5

• Basic Functional Interior for Workhorse.

• The paint has good overall coverage and is protecting the metal airframe structure well. Continuous detailing of the paint provides many years of service life to remain before a complete repaint job would be required.

• Complete Logs
• Landing Gear Overhaul 5 Year Gear Insp Due 1/25

• No Damage History located in Logs or on NTSB website